Programs

[gevv]

Abacom (pack)



Abacom Lochmaster 3.0
FrontDesigner 3.0
Abacom Profilab Expert Digital 3.0
Abacom Splan 6
Abacom Sprint layout 4 and 5

http://rapidshare.com/files/311000611/abacomda.rar
pass: gevv

---------------------------------------------------------------

CMOS TTL DISK 2000



http://rapidshare.com/files/311006723/lesson.rar

pass: gevv+gevv
---------------------------------------------------------------

ECA VRT DISK 2009



http://rapidshare.com/files/250948109/SemiDat_998.part01.rar
http://rapidshare.com/files/250950710/SemiDat_998.part02.rar
http://rapidshare.com/files/250953178/SemiDat_998.part03.rar
http://rapidshare.com/files/250955285/SemiDat_998.part04.rar
http://rapidshare.com/files/250957326/SemiDat_998.part05.rar
http://rapidshare.com/files/250959350/SemiDat_998.part06.rar
http://rapidshare.com/files/250961176/SemiDat_998.part07.rar
http://rapidshare.com/files/250963103/SemiDat_998.part08.rar
http://rapidshare.com/files/250965242/SemiDat_998.part09.rar
http://rapidshare.com/files/250967055/SemiDat_998.part10.rar
http://rapidshare.com/files/250969321/SemiDat_998.part11.rar
http://rapidshare.com/files/250971771/SemiDat_998.part12.rar
http://rapidshare.com/files/250974118/SemiDat_998.part13.rar
http://rapidshare.com/files/250976644/SemiDat_998.part14.rar
http://rapidshare.com/files/250979137/SemiDat_998.part15.rar
http://rapidshare.com/files/250981562/SemiDat_998.part16.rar
http://rapidshare.com/files/250983573/SemiDat_998.part17.rar

---------------------------------------------------------------


Crocodile Physics v6.05 &  Technology v6.05



http://rapidshare.com/files/311021591/kromkodilla.rar

pass: gevv

----------------------------------------------------------------


Applied Flow Technology Impulse 4.0



http://rapidshare.com/files/311025454/afti.rar

pass: gevv


----------------------------------------------------------------


Liatro Electrical Design v3.2



http://rapidshare.com/files/311026437/ledmed.rar

pass: gevv





-----------------------------------------------------------------


E-studio Professional v4.29.2




studio Pro is a powerful schematic visualization software designed to organize all electronic engineering data into a single visual environment regardless of their original CAD platform. used to view EdaXML, EDIF, OrCAD Capture databases, PADS ASCII databases

http://rapidshare.com/files/311031422/suyututyo.rar

pass: gevv



----------------------------------------------------------------------

Portable.Crocodile.Technology.609 & Portable Diptrace 2.0 & Portable OrCad 9.2

http://rapidshare.com/files/311050665/portapplemac.rar

pass: gevv


-----------------------------------------------------------------------

SMPS MODELS (SPICE)

http://rapidshare.com/files/311054524/smpsmodels.rar

pass: gevv


------------------------------------------------------------------------

Cadence, OrCAD Unison Suite Professional Edition 10.0 Full

Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Password: www.AvaxHome.ru

---------------------------------------------------------------------


BluePrint pcb

BluePrint is a revolutionary new $10,000 document authoring tool, developed in the style of Microsoft Office, which quickly creates electronic drawings to drive the PCB fabrication and assembly processes. BluePrint provides more flexibility than PCB CAD solutions while still retaining all the intelligence that PCB CAD provides. PCB CAD allows only one view of the PCB at any one time. All data must be contained around this PCB view. PCB requires the use of layers to display a 'picture' of a document on the screen; however the document never actually exists in the database. BluePrint uses a drawing/sheet based approach and allows the user to create actual PCB documents (drill drawing, assembly drawing, parts list, etc) and stores them in an electronic release package.

Part 1
Part 2
Part 3
Part 4

[vayupak_01]

Front designer 3.0v
http://rapidshare.com/files/13175511/ABACOM_FrontDesigner_v.3.rar.html
Approx 87 mb
tested % % solid works iso format'ted
Daemon tools excellent installation or iso buster. nero is bad !
install than after
http://rapidshare.com/files/13161223/frontdesigner30_update_.exe.html
Tesekkurler gevv ...

Hi ipek link is dead
Have you any more link for frontdesigner
please upload again naaaa

THX

[MAXPAYNE]

http://soporte.free.fr/doc/Electricidad.zip

Always put some info abt soft.

[ranti]

Everest Ultimate 4.20

Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide


Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide
Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide


http://www.lavalys.com/products/overview.php?pid=3&ps=UE&lang=en

[korrapat]

Do any one have Kiel51 V.8 full

[MAXPAYNE]

Everest Ultimate 4.20

Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide


Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide
Can change to loads of different languages during installing.

Info:

    EVEREST Ultimate Edition is the cutting-edge benchmarking and diagnostics tool to maximize security, performance, and trouble-shooting capabilities for home and home office PC environments, PC Professionals and consulting firms as well as OEM partners and Configuration Centres worldwide


http://www.lavalys.com/products/overview.php?pid=3&ps=UE&lang=en

ranti, u r posting topics in wrong section. there is a software section and this section is only for electronics soft.

[Trishool]

Dear gevv ,  Please inform me the total size of this design suite

"Cadence, OrCAD Unison Suite Professional Edition 10.0"   that you have posted in plenty parts .



Regards
Ts

[sheriefaly]

for orcad user
this is a library for layout in eagle profile

Posted on: January 22, 2008, 12:55:18 12:55 - Automerged
i made a replay with attachment
my attachment dose not apear in the replay
what have i do to corrent

[thetrueman]

Hello gevv,

I need the live wire, pcb wizard, circuit wizard, bright spark and control studio from New-Wave-Concept.com

please upload it

Thanks

[wat]

Automation Studio 5.0 Full (all control system simulation soft.)
http://rapidshare.com/files/44576252/Automation_5.0.part1.rar
http://rapidshare.com/files/44586270/Automation_5.0.part2.rar
http://rapidshare.com/files/44596239/Automation_5.0.part3.rar

[marty.markoh]

Hi!For everyones who needs PCB Wizard 3.50 Pro Unlimited(full)-here is my FRESH download link:
http://rapidshare.com/files/87029970/PCB_Wizard_3.50_Pro_Unlimited_by_marty.rar
and  pass for rar:
ibp corporation/forum
Enjoy! (SHARE THINGS-NOTHING TO LOOSE!)

[13jack13]

Caddy++ v3.82
http://rapidshare.com/files/81828685/cad_dy___ele_ctrical_3.82_SP1.rar.html
http://rapidshare.com/files/81826068/Key.rar.html
http://rapidshare.com/files/88536929/help_for.rar.html

Posted on: February 06, 2008, 02:59:12 02:59 - Automerged
FluidDraw 4.11c
http://rapidshare.com/files/88282558/FLUIDRAW.RAR.html

FluidSIM-P 3.6h
http://rapidshare.com/files/88284285/Festo_Fluidsim.rar.html

[samir_1982]

Eplan 5.7 links

7 parts
http://rapidshare.com/files/985703/Eplan57inern.part01.rar
http://rapidshare.com/files/985749/Eplan57inern.part02.rar
http://rapidshare.com/files/985722/Eplan57inern.part03.rar
http://rapidshare.com/files/985728/Eplan57inern.part04.rar
http://rapidshare.com/files/985745/Eplan57inern.part05.rar
http://rapidshare.com/files/988158/Eplan57inern.part06.rar
http://rapidshare.com/files/987826/Eplan57inern.part07.rar

Regards

hi
plz help
this error extracting file
!   I:Eplan5.7\Eplan57inern.part01.rar: CRC failed in Eplan57inern\EPLAN\E5\ESC43E~1.cab. The file is corrupt
!   I:Eplan5.7\Eplan57inern.part02.rar: CRC failed in Eplan57inern\EPLAN\E5\SYDD5C~1.cab. The file is corrupt
!   I:Eplan5.7\Eplan57inern.part03.rar: CRC failed in Eplan57inern\EPLAN\MDAC\1029\mdac_typ.exe. The file is corrupt
plz upload 3 file

[acat_lm]

The program offered WAT, January 31, 2008 is not Automation Studio 5.0 Full, do not load it.
 Bad joke...

[rosope]

MY ENGLISHMAN IS QUITE LIMITED THAT'S WHY I ASK FOR HELP to the PERMISA's MODERATORS TO SEE LACE THEM

[benaddi6]

you y have software to help to make a speaker (big)

[manuelroin]

maybe you can use BABILON is good for start

[olotill]

Hello mate...

you can use google traductor, is easily, free and quick...

Hope it can help  you... some time ago I had the same trouble...

Best regards...

[zokij]

DASYLab v10 

DASYLab v10 software available from Scitech is designed for those who want to get down to work straight away, without having to write programs.

DASYLab v10 software’s simple, point-and-click interface lets you set up data acquisition routines quickly and easily.

With DASYLab you can create your own individual measurement or analysis application in a few minutes.

Whatever your requirements in the control and instrumentation environment, DASYLab v10 can meet your needs, from research and analysis to large-scale production and quality control.

Features: DASYLab v10 is now supported on Vista (32 bit), Windows XP SP2 and Windows 2000 SP4.

To use DASYLab with Windows Vista you will also need data acquisition hardware which is compatible with Vista. You can already use the following data acquisition card drivers for measurement and visualization under Windows Vista (32.)

    * Adlink NUDAM driver
    * Advantech ADAM driver
    * ICP CON driver
    * MSL SOLO driver
    * National Instruments IEEE
    * National Instruments NI-CAN
    * National Instruments NI-DAQmx
    * Measurement Computing MCC-DAQ
    * Microstar Laboratories DAP
    * Modbus
    * Omega/Newport OMR driver
    * OPC-DA Client
    * Sound card
    * Superlogics driver

New and improved DASYLab Modules:

Action module - The Action module has a new channel order option, which enables you to define a set order in which the actions will be performed

Diagram module – Multifunction graphing and charting - The new display module combines the displays of a Recorder, a Yt Chart, and an XY Chart. The diagram displays all data channels in one axis system or each data channel in separate axis systems. It has easy to use scrolling tools to enable you to review data that has been acquired.

Write data module - Enhanced support for the DIAdem TDM data file format has been added, with 50 custom properties for data channels and groups added to this option.

Improved Algorithms for Signal Processing; Block size no longer restricted to a power of two - DASYLab can now perform signal analysis for data blocks that do not have the power of two. Select FFT without the power of two.

This affects the following modules:

    * Correlation module
    * FFT module
    * Electro technical characteristics module
    * Transfer module

General new features:

Import and export variables and strings automatically

A new feature makes it easier to transfer global strings variables between worksheets without making it necessary to use Action modules. You can specify a unique VAR file to store the global variables and strings for each set of worksheets, so that there is no danger of transferring values where it is not intended.

At measurement start you can import global variables and global strings including the properties from a VAR file. When the measurement stops, you can export the global variables and strings back into a VAR file.

You enable this behaviour under Options»Global Worksheet Settings. DASYLab v10 software saves these settings together with the worksheet.

Module benchmarking

DASYLab 10 includes detailed analytics on the performance of every DASYLab module within a running worksheet.

To enable this, you must check the setting compute module benchmarking in the options»global setup menu before running the worksheet, and you will then find the option module benchmarking available in the options menu.

Selecting this will launch a dialogue which shows the processing times of the modules implemented in the worksheet. (Note, running these analytics will consume processing power, so this feature should normally be disabled when the worksheet is in normal operation.)

Sequencer

It is now possible to generate documentation for a DASYLab sequencer file. To document the currently created or loaded sequencer in a text file select File»Export in the sequencer window. DASYLab v10 software saves control sequences as an HTML file and transfers the tree structure to a list with two levels.

Other changes:

Action-controlled relay module

The action controlled relay has been enhanced; you can now switch each data channel separately. If you want to switch all data channels simultaneously, do not specify any channels in the Action module.

Formula interpreter module

The exp() function recognises floating point values that are greater than 264.

E-Mail module

E-mails are sent within an independent thread that Windows manages as a self-contained process independent of DASYLab. This way the sending of an e-mail does not block DASYLab anymore. You can specify a timeout of 1 to 100 seconds and document the send status in a global variable.

Variables/Strings overview

You can now open the Variables/Strings overview in the options menu without errors even if a variable uses a system variable or if a string uses a system string.

Rainflow module

DASYLab v10 software interprets the setting end of the last class accurately again.

Modbus Modules

The Modbus modules analogue input and digital input work with modified interface behaviour to provide measurement data. DASYLab v10 software needs a continuous, consistent, and equidistant data flow from the driver to the worksheet modules.

The driver uses an independent thread with a repetition rate of one millisecond for data acquisition via the COM interface. Within a thread the driver receives all relevant Modbus data and buffers the respective data for each data channel.

When the driver outputs the buffered thread data to the data blocks the driver disregards the reception time stamp for the positioning. If the measurement starts without thread data being available, the driver waits for data and does not output data in the meantime.

If the driver receives measurement data and a position in a data block has not received data, the driver outputs the last value again at this position.

Help files

The help sections for the modules groups trigger functions, statistics, files, and special have been completely revised. The help for the Remote-I/O driver Advantech ADAM, Adlink NUDAM, ICP CON, MSL SOLO, Newport / Omega OMR, and Superlogics have also been revised.

Drivers

The following drivers have been expanded and revised.

    * Adlink NUDAM driver.
    * Advantech ADAM driver
    * ICP CON driver
    * Measurement Computing MCC-DAQ Driver
    * Microstar Laboratories DAP Driver
    * MSL Solo Driver
    * National Instruments NI-DAQmx Driver
    * NI-DAQmx (with & without CAN)
    * National Instruments NI-CAN Hardware
    * Newport / Omega OMR Driver
    * OPC-DA Client
    * Superlogics driver
    * Vector CAN Driver
    * IXXAT CAN Driver
    * Sound Card Driver

System requirements:

For the correct DASYLab performance the following minimum requirements must be met:

Hardware

    * IBM-PC and compatible with an Intel Pentium (III, IV), Athlon, AMD K6 or AMD K7 processor (32 Bit)
    * Minimum of 512 MB memory, recommended: 1 GB
    * Hard disk memory: at least 100 MB free memory space
    * Graphics board: color depth 24 or 32 bit (true color) and a screen resolution of 1024x768 or more
    * A mouse because you can operate certain DASYLab functions only with the mouse

Operating systems

    * Windows Vista 32 Bit
    * Windows XP Pro, Service Pack 2 or later
    * Windows 2000, Service Pack 4 or later


LINK:
part 1  http://rapidshare.com/files/97758286/DASYLab.part1.rar
part 2  http://rapidshare.com/files/97763677/DASYLab.part2.rar

Nice time 

[Captain25]

this is the link enjoy

http://rapidshare.com/files/100631037/FluidSIM3.6_Full.rar.html

[marty.markoh]

Hi-2 all-who need Livewire-fresh (my)link
http://rapidshare.com/files/102796095/Livewire_1.11_Pro_BY_MARTY.rar
no pass.
 

[pedro06]

Circuit Simulator.     Size 5.67MB


Link to download: http://rapidshare.com/files/27194071/CircuitMaker.zip

Small and useful application to determine the value of resistance. From good use for studying electronica.    Size  230KB


Link to download:http://rapidshare.com/files/27183323/CodRes.exe

WinBreadboard      Size  171KB


Link to download: http://rapidshare.com/files/27184380/WinBreadboard.zip


Forgiveness for errors in translation

Posted on: April 04, 2008, 05:02:36 05:02 -

 

[jeanninemtv]

your circuit simulator is not circuit maker  is crocodile clips... or corocodile technology

[pedro06]

His weight is 2 files 100mb and one 87mb.

Said 7 but is multisim 10.



http://rapidshare.com/files/83603933/multisim7.part1.rar.html
http://rapidshare.com/files/83604273/multisim7.part2.rar.html
http://rapidshare.com/files/83620967/multisim7.part3.rar.html

 

[jovan]

For Eplan 5.7 and Eplan 21 here you file not found.

[ratoseco]

Friend Pedro, the first image "Circuit Simulator" is not of "CircuitMaker" seems that is of the "crocodile"